EFFECT OF CONSOLIDATION TIME ON EXPERIMENTAL AND STANDARDIZED HORIZONTAL PRESSURES IN VERTICAL SILOS
DOI:
https://doi.org/10.47820/recima21.v3i1.1029Keywords:
study of the pressures that the stored productAbstract
The study of the pressures that the stored product exerts on the silo walls is a relevant factor, the present work has the objective of determining, empirically and experimentally, the loading and unloading pressures along the circular section of the vertical metal silo exerted by the stored product and the influence of the consolidation time. For the determination of horizontal and frictionpressures, devices composed of pairs of load cells were used, fixed to square sections of the silo of the silo with 2.5 m of body height and 0.64 m of internal diameter and tremonha with 0.51 m height and inclination of approximately 60° with the horizontal, made of smooth steel with 1 mm thickness. The corn loading and unloading tests were in quintupleata, and three consolidation times were adopted, which were 6, 12 and 24 hours. The experimentally determined pressures were compared to the values found from the equations contained in the standards AS 3774 (1990) and BS EN 1991/4 (2006). It was evidenced that the experimental data of horizontal pressure during loading were always lower than those standardized, considering that the standards increase the values due to the use of safety coefficients and although the calculations were performed with the subtraction of this coefficient, no interference of the consolidation times analyzed in the pressures was observed.
Downloads
References
AS 3774. Australian Standard. Loads on bulk containers. Sydney: Australian Standard, 62p., 1990.
Bandeira, D. J. A., Nascimento, J. J. da S., & Nascimento, J. W. B. do. (2020). Flow analysis of poultry feed in slender vertical silos with inverted cone insert. Research, Society and Development, 9(11), e63091110369. https://doi.org/10.33448/rsd-v9i11.10369
Bandeira, D. J. A., Lima, M. J. N. da C., Oliveira, A. N. de., Branco, R. R. C., Nascimento, K. L. do., Costa, R. F., & Nascimento, J. J. da S. (2021a). Physical and flow properties of common bean cultivars for the design of vertical silos. Research, Society and Development, 10(12), e208101220347. https://doi.org/10.33448/rsd-v10i12.20347
Bandeira, D. J. A., Meira, A. S., Leite, P. G., Oliveira, A. N. de., Lima, M. J. N. da C., Aragão, K. P., Branco, R. R. C., Castro, A. P. (2021b). “Analysis of pressures in a storage silo of bean cultivars with different types of steel”, International Journal of Development Research, 11, (09), 51278-51281. https://doi.org/10.37118/ijdr.23004.10.2021.
Bandeira, D. J. A, Leite, P. G., Aragão, K. P., Oliveira, A. N. de., Márcia Janiele Nunes da Cunha Lima1, Melo, D. F., Meira, A. S., Castro, A. P. (2021c). “Vertical silo pressure analysis with unusual building materials”, International Journal of Development Research, 11, (10), 50875-50878.
BS EN 1991-4-_Eurocode 1. Actions on structures. Silos and tanks. 112p., 2006.
Calil Junior, C.; Cheung, A. B. Silos: Pressões, fluxo, recomendações para o projeto e exemplos de cálculo. São Carlos, Universidade de São Paulo, 240 p., 2007.
Carrión, A. A. (2015). Grandes silos de almacenamiento de clínker: análisis y priorización. Tese de doutorado. Universitat Politècnica de València. Valencia, 732p.
Couto, A.; Ruiz, A.; Aguado P.J. Design and instrumentation of a mid-size test station for measuring static and dynamic pressures in silos under different conditions – Part I: Description. Computers and Electronics in Agriculture, p.164–173, 2012.
Couto, A.; Ruiz, A.; Herráez, L.; Moran, J.; Aguado, P. J. Measuring pressures in a slender cylindrical silo for storing maize. Filling, static state and discharge with different material flow rates and comparison with Eurocode 1 part 4. Computers and Electronics in Agriculture. v. 96, p. 40–56, 2013.
Ding, S.; Ji,Y.; Senbin, Y.; Rotter, J.M.; Li, Q. (2014). Measurements of pressure and frictional tractions along walls of a large-scale conical shallow hopper and comparison with Eurocode1991-4:2006. Thin-Walled Structures, p. 231–238.
Dornelas, K. C., Silva, V. R., Pessoa, Y. C. C., Nascimento, J. W. B. 2021. Propriedades físicas e de fluxo de produtos granulares para projeto de silo. Research, Society and Development, v. 10, n.10, e234101018754.
Fank, M. Z.; Christ, M. Z.; D.; Cardoso, D. L.; Willrich, F. L.; Lorenzi, V. (2015). Coeficiente de transferência de carga nas fundações de silos verticais cilíndricos, Revista Brasileira de Engenharia Agrícola e Ambiental, p. 887–891.
Fank, M. Z.; Nascimento, J. W. B.; Cardoso, D. L.; Meira, A. S.; Willrich, F. L. (2018). Vertical pressures and compressive friction force in a large silo. Scientific Paper, Agricultural Building and Environment • Eng. agríc. (Online) 38 (4).
Fitzpatrick, J. J.; Iqbal, T.; Delaney, C.; Twomey, T.; Keogh, M. K. Effect of powder properties and storage conditions on the flowability of milk powders with different fat contentes. J. Food Eng. V.64, p. 435–444, 2004.
Fitzpatrick, J. J.; Barry, K.; Cerqueira, P. S. M.; Iqbal, T.; O’neill, J.; Roos, Y. H. Effect of composition and storage conditions on the flowability of dairy powders. Journal of Food Engineering, v.17, p.328-392, 2007.
Goodey R. J.; Brown, C. J.; Rotter J. M. Rectangular steel silos: Finite element predictions of filling wall pressures. Engineering Structures, v.132, p.61–69, 2017.
Horabik, J.; Molenda, M. Distribution of static pressure of seeds in a shallow model silo. Int. Agrophys., v.31, p.167-174, 2017.
Janssen, H. A. Verssuche uber Getreidedruck in Silozellen. Z. Ver. Dtsch. Ing., p. 1045–1049, 1895.
Liu, S.D.; Zhou, Z.Y.; Zou, R.P.; Yu, D.; Pinson, A.B. (2014). Flow characteristics and discharge rate of ellipsoidal particles in a flat bottom hopper. Powder technology, v. 253, p. 70–79.
Lopes Neto, J. P.; Silva, V. R. da; Nascimento, J. W. B. do. Propriedades de fluxo de produtos pulverulentos alimentícios. Revista Brasileira de Engenharia Agrícola e Ambiental, p. 639-644, 2009.
Lopes Neto, J. P.; Meira, A. S.; Nascimento, J. W. B. (2017). Flow properties and pattern flow prediction of food industrial powders. Scientific Paper, Agricultural Building and Environment. Eng. agríc. 37 (04).
Madrona, F. S.; Calil Junior, C. (2009). Análise das pressões em silos esbeltos com descarga excêntrica. Cadernos de Engenharia de Estruturas, São Carlos, p. 37-56.
Meira, A. S.; Mota, E. L.; Bandeira, D. J. A.; Silva, V. R.; Silva, L. A. (2019). Propriedades de fluxo e pressões para projeto de silo vertical armazenador de açúcares. Revista Engenharia na Agricultura V.27, n.2, p.104-110.
Meira, A. S.; Nascimento, J. W. B.; Silva, V. R.; Nascimento, R. T.; Soares, H. R. (2020). Análise comparativa de pressões horizontais durante o carregamento em silos verticais metálicos. Pesquisa e Ensino em Ciências Exatas e da Natureza, 4:e1539.
Teunou, E.; Fitzpatrick, J. J. Effect of storage time and consolidation on food powder flowability. Journal of Food Engineering, v.43, p.97-101, 2000.
Wojcik, M.; Sondej, M.; Rejowski, K.; Tejchman, J. Full-scale experiments on wheat flow in steel silo composed of corrugated walls and columns. Powder Technology, 2017.
Yin, Wang; Lu, Yong; Ooi Jin Y. (2015). A numerical study of wall pressure and granular flow in a flat-bottomed silo. Powder Technology, p.43–54.
Downloads
Published
How to Cite
Issue
Section
Categories
License
Copyright (c) 2022 RECIMA21 - Revista Científica Multidisciplinar - ISSN 2675-6218
This work is licensed under a Creative Commons Attribution 4.0 International License.
Os direitos autorais dos artigos/resenhas/TCCs publicados pertecem à revista RECIMA21, e seguem o padrão Creative Commons (CC BY 4.0), permitindo a cópia ou reprodução, desde que cite a fonte e respeite os direitos dos autores e contenham menção aos mesmos nos créditos. Toda e qualquer obra publicada na revista, seu conteúdo é de responsabilidade dos autores, cabendo a RECIMA21 apenas ser o veículo de divulgação, seguindo os padrões nacionais e internacionais de publicação.
