ANALYSIS OF HORIZONTAL PRESSURES VERSUS FOREIGN STANDARDS IN FLAT WALL VERTICAL SILO
DOI:
https://doi.org/10.47820/recima21.v2i11.1024Keywords:
determination of the intensity and distributionAbstract
The determination of the intensity and distribution of pressures during discharge still presents considerable difficulties, since it is a complex phenomenon on which pressures depend. Thus, the present work employs the equations presented in bs EN 1991/4 (2006) to determine the representative asytote of the distribution of pressures along the body of a prototype stainless steel silo with 1 mm wall thickness, presenting by dimensions of 2.50 m height and 0.64 m in diameter, for corn grain storage. Flow properties were determined using Jenike Shear Cell. The result of horizontal pressures lower than the standardized values was obtained, thus evidencing an increase in the standardized values due to the safety coefficients imposed.
Downloads
References
AS 3774. (1990). Australian Standard. Loads on bulk containers. Sydney: Australian Standard, 62p.
Bandeira, D. J. A., Nascimento, J. J. da S., & Nascimento, J. W. B. do. (2020). Flow analysis of poultry feed in slender vertical silos with inverted cone insert. Research, Society and Development, 9(11), e63091110369. https://doi.org/10.33448/rsd-v9i11.10369
Bandeira, D. J. A., Lima, M. J. N. da C., Oliveira, A. N. de., Branco, R. R. C., Nascimento, K. L. do., Costa, R. F., & Nascimento, J. J. da S. (2021a). Physical and flow properties of common bean cultivars for the design of vertical silos. Research, Society and Development, 10(12), e208101220347. https://doi.org/10.33448/rsd-v10i12.20347
Bandeira, D. J. A., Meira, A. S., Leite, P. G., Oliveira, A. N. de., Lima, M. J. N. da C., Aragão, K. P., Branco, R. R. C., Castro, A. P. (2021b). “Analysis of pressures in a storage silo of bean cultivars with different types of steel”, International Journal of Development Research, 11, (09), 51278-51281. https://doi.org/10.37118/ijdr.23004.10.2021.
Bandeira, D. J. A, Leite, P. G., Aragão, K. P., Oliveira, A. N. de., Márcia Janiele Nunes da Cunha Lima1, Melo, D. F., Meira, A. S., Castro, A. P. (2021c). “Vertical silo pressure analysis with unusual building materials”, International Journal of Development Research, 11, (10), 50875-50878.
BS EN 1991-4-_Eurocode 1. (2006). Actions on structures. Silos and tanks. 112p.
Carrión, A. A. (2015). Grandes silos de almacenamiento de clínker: análisis y priorización. Tese de doutorado. Universitat Politècnica de València. Valencia, 732p.
Couto, A.; Ruiz, A.; Aguado P.J. (2012). Design and instrumentation of a mid-size test station for measuring static and dynamic pressures in silos under different conditions – Part I: Description. Computers and Electronics in Agriculture, p.164–173.
Couto, A.; Ruiz, A.; Herráez, L.; Moran, J.; Aguado, P. J. (2013). Measuring pressures in a slender cylindrical silo for storing maize. Filling, static state and discharge with different material flow rates and comparison with Eurocode 1 part 4. Computers and Electronics in Agriculture. v. 96, p. 40–56.
Ding, S.; Ji,Y.; Senbin, Y.; Rotter, J.M.; Li, Q. (2014). Measurements of pressure and frictional tractions along walls of a large-scale conical shallow hopper and comparison with Eurocode1991-4:2006. Thin-Walled Structures, p. 231–238.
Fank, M. Z.; Christ, M. Z.; D.; Cardoso, D. L.; Willrich, F. L.; Lorenzi, V. (2015). Coeficiente de transferência de carga nas fundações de silos verticais cilíndricos, Revista Brasileira de Engenharia Agrícola e Ambiental, p. 887–891.
Fank, M. Z.; Nascimento, J. W. B.; Cardoso, D. L.; Meira, A. S.; Willrich, F. L. (2018). Vertical pressures and compressive friction force in a large silo. Scientific Paper, Agricultural Building and Environment • Eng. agríc. (Online) 38 (4).
Goodey R. J.; Brown, C. J.; Rotter J. M. (2017). Rectangular steel silos: Finite element predictions of filling wall pressures. Engineering Structures, v.132, p.61–69.
Janssen, H. A. (1895). Verssuche uber Getreidedruck in Silozellen. Z. Ver. Dtsch. Ing., p. 1045–1049.
Liu, S.D.; Zhou, Z.Y.; Zou, R.P.; Yu, D.; Pinson, A.B. (2014). Flow characteristics and discharge rate of ellipsoidal particles in a flat bottom hopper. Powder technology, v. 253, p. 70–79.
Lopes Neto, J. P.; Meira, A. S.; Nascimento, J. W. B. (2017). Flow properties and pattern flow prediction of food industrial powders. Scientific Paper, Agricultural Building and Environment. Eng. agríc. 37 (04).
Madrona, F. S.; Calil Junior, C. (2009). Análise das pressões em silos esbeltos com descarga excêntrica. Cadernos de Engenharia de Estruturas, São Carlos, p. 37-56.
Meira, A. S.; Mota, E. L.; Bandeira, D. J. A.; Silva, V. R.; Silva, L. A. (2019). Propriedades de fluxo e pressões para projeto de silo vertical armazenador de açúcares. Revista Engenharia na Agricultura. V.27, n.2, p.104-110.
Meira, A. S.; Nascimento, J. W. B.; Silva, V. R.; Nascimento, R. T.; Soares, H. R. (2020). Análise comparativa de pressões horizontais durante o carregamento em silos verticais metálicos. Pesquisa e Ensino em Ciências Exatas e da Natureza, 4:e1539.
Wright, C. (2017). The Effect of Grain Shape on Side-Wall Pressure in Model Grain Silos. Proceedings of The National Conference: On Undergraduate Research (NCUR). University of Memphis - TN.
Wojcik, M.; Sondej, M.; Rejowski, K.; Tejchman, J. (2017). Full-scale experiments on wheat flow in steel silo composed of corrugated walls and columns. Powder Technology.
Yin, Wang; Lu, Yong; Ooi Jin Y. (2015). A numerical study of wall pressure and granular flow in a flat-bottomed silo. Powder Technology, p.43–54.
Downloads
Published
How to Cite
Issue
Section
Categories
License
Copyright (c) 2021 RECIMA21 - Revista Científica Multidisciplinar - ISSN 2675-6218
This work is licensed under a Creative Commons Attribution 4.0 International License.
Os direitos autorais dos artigos/resenhas/TCCs publicados pertecem à revista RECIMA21, e seguem o padrão Creative Commons (CC BY 4.0), permitindo a cópia ou reprodução, desde que cite a fonte e respeite os direitos dos autores e contenham menção aos mesmos nos créditos. Toda e qualquer obra publicada na revista, seu conteúdo é de responsabilidade dos autores, cabendo a RECIMA21 apenas ser o veículo de divulgação, seguindo os padrões nacionais e internacionais de publicação.
