COMPARATIVE ANALYSIS OF THE BUTADIENE STYRENE LATEX ADDITIVE IN RECYCLED AGGREGATE CONCRETE

Authors

DOI:

https://doi.org/10.47820/recima21.v4i1.2355

Keywords:

demonstrate through research, the concrete use of recycled

Abstract

This study aims to compare through research the use of recycled aggregate concrete to minimize undue disposal. However, this concrete produced with recycled aggregate presents several problems, such as a lower specific mass, loss of workability and high consumption of cement due to high water absorption, besides presenting higher porosity, compared to the natural aggregate. Due to the mortar adhered to its surface, which promotes the increase of the water/cement ratio, there is a decrease in the specific mass of this concrete produced from recycled aggregate. Thus, the compressive strength of this concrete tends to decline with the increase of the replacement content of the natural aggregate by the recycled aggregate. Another possible solution is the use of latex, which are particle dispersions of organic polymers in water, milky fluids that have white coloration. However, only 5% of these latexs can be used with Portland cement. One of the most used latex for concrete is butadiene styrene latex, which is analyzed in this study. It can decrease the need for adding water to the mortar, slowing the hydration of cement, thereby increasing the tenacity, and improving the workability of concrete. Studies show a maximum increase in compressive strength of 20.95%, using a latex content of 15%, a maximum increase in bending strength of 36.35% for conventional concrete, aiming at increasing the use of recycled concrete aggregate in civil construction.

Downloads

Download data is not yet available.

Author Biographies

Lucas Souza Araujo

Universidade Paulista

Alex Silva

Universidade Paulista

Jessica Araujo Suzart

Universidade Paulista

Millena Santos Cardozo

Universidade Paulista

Pedro Assunção

Universidade Paulista

Leonardo Moraes Armesto

Doutorando em Engenharia Biomédica, Mestrado em Bioengenharia pela UNIESP-Universidade Brasil, Pós-Graduação em Ciência e Engenharia de Materiais, Gestão Estratégica de Negócios na instituição de ensino Centro Universitário Monte Serrat (Unimonte), Pós-Graduação em Energias Renováveis, pela Politécnica Universidad de Madrid e em Astrofísica pela Universidade de Santa Catarina. Especialista em Arquitetura, Construção e Gestão de Edificações Sustentáveis. Especialização em Filosofia e História da Ciência. Graduado em Engenharia Civil na instituição Centro Universitário Monte Serrat, Engenharia Eletricidade, Engenharia Industrial Mecânica, Engenharia Ambiental e Análise e Desenvolvimento de Sistemas pelo Instituto Brasileiro de Tecnologia Avançada, Licenciaturas em: Física, Matemática, Química, Filosofia, Sociologia e Pedagogia Licenciado, além de Licenciando em História pela Universidade de Franca; além de Medicina pela autarquia pública na Faculdade Municipal de São Caetano do Sul. 

References

ABNT. NBR 6118:2014 Projeto de estrutura de concreto - Procedimento, Rio de Janeiro, n. 2. Acesso em: 31 maio 2021

ABNT. NBR NM 248:2003 Agregados - Determinação da composição granulométrica, Rio de Janeiro. Acesso em: 31 maio 2021

ABNT. NBR 7222:2011Argamassa e concreto- Determinação da resistência à tração por diametral de corpos-de-prova cilíndricos, Rio de Janeiro, 2011. Acesso em: 31 maio 2021

ABNT. NBR 15116:2021Agregados Reciclados para uso em argamassas e concretos de cimentos Portland - Requisitos e métodos de ensaios, Rio de Janeiro, 2021. ISSN 978-85-07-08524-9.Acesso em: 31 maio 2021

ACI, 548.3R-03Polymer-Modified Concrete.Michigan, 2003. Disponível: http://civilwares.free.fr/ACI/MCP04/5483r_03.PDF. Acesso em: 15 maio 2022

ACI, 548.1R-09Guide for the Use of Polymers in Concrete. Michigan, 2003. Disponível: https://betonzist.ir/wp-content/uploads/2020/02/ACI-548.1R-09-Guide-for-the-Use-of-Polymers-in-Concrete.pdf. Acesso em: 16 maio 2022

AFRIDI, M.U.K; OHAMA, Y; ZAFAR IQBAL, M; DEMURA, K. Water retention and adhesion of powdered and aqueous polymer-modified mortars. Cement & Concrete Composites, v. 17, p. 113-118, 1995. Disponivel: https://www.sciencedirect.com/science/article/abs/pii/095894659500007Y. Acesso em: 30 mar. 2022.

ARUN, A; DSVSMRK, C; MURALI, K. Comparative analysis on natural and recycled coarse aggregate concrete. Materials Today: Proceedings, v. 46, p. 8837-8841, 2021. Disponível: https://www.sciencedirect.com/science/article/pii/S2214785321032727. Acesso em: 03 mar. 2022.

ASSAAD, J. J. Development and use of polymer-modified cement for adhesive and repair applications,Construction and Building Materials, n. 163, p. 139–148, 2018. Disponível: https://www.sciencedirect.com/science/article/abs/pii/S0950061817325084. Acesso em: 10 abr. 2022.

BARLUENGA, G; HERNÁNDEZ-OLIVARES, F. SBR latex modified mortar rheology and mechanical behaviour. Cement and Concrete Research, v. 34, p. 527 - 535, 2004. Disponível: https://www.sciencedirect.com/science/article/abs/pii/S0008884603003247. Acesso em: 13 abr. 2022.

BRASIL,Resolução CONAMA nº307, de 05 de junho de 2002. Ministério do Meio Ambiente. Brasília. 2002. Estabelece diretrizes, critérios e procedimentos para a gestão de resíduos da construção civil.

CANTERO, B; SÁEZ DEL BOSQUE, I.F; MATÍAS, A; MEDINA, C. Statistically significant effects of mixed recycled aggregate on the physical-mechanical properties of structural concretes. Construction and Building Materials, v. 185, p. 93-101, 2018. Disponível: https://www.sciencedirect.com/science/article/pii/S0950061818317331. Acesso em: 10 abr. 2022

CONTRERAS, M; TEXEIRA, SR; LUCAS, MC; LIMA, LCN; CARDOSO, DSL; DA SILVA, GAC; GREGÓRIO, G.C; DE SOUZA, AE; DOS SANTOS, A. Recycling of construction and demolition waste for producing new construction material (Brazil case-study). Construction and Building Materials, v. 123, p. 594-600, 2016. Disponível: https://www.sciencedirect.com/science/article/abs/pii/S0950061816311448. Acesso em: 12 mai. 2022.

DHIR, R.K; BRITO, J; SILVA, R.V; LYE, C.Q. 7 - Fresh Concrete Properties. Sustainable Construction Materials, p. 181-218, 2019. Disponivel: https://www.sciencedirect.com/science/article/pii/B9780081009857000078. Acesso em: 20 abr. 2022.

ELHAKAM, A.A; MOHAMED, A.E; AWAD, E. Influence of self-healing, mixing method and adding silica fume on mechanical properties of recycled aggregates concrete. Construction and Building Materials, p. 421-427, 2012. Disponivel: https://www.sciencedirect.com/science/article/pii/S0950061812002152. Acesso em: 11 abr. 2022.

EREN, F; GÖDEK, E; KESKINATEş, M; TOSUN-FELEKOğLU, K; FELEKOğLU, B. Effects of latex modification on fresh state consistency, short term strength and long term transport properties of cement mortars. Construction and Building Materials, v. 133, p. 226 - 233, 2017. Disponível: https://www.sciencedirect.com/science/article/abs/pii/S0950061816320062. Acesso em: 20 abr. 2022.

ETXEBERRIA, M; GONZALEZ-COROMINAS, A. Properties of high performance concrete made with recycled fine ceramic and coarse mixed aggregates. Construction and Building Materials, v. 68, p. 618-626, 2014. Disponível: https://www.sciencedirect.com/science/article/pii/S0950061814007314. Acesso em: 20 mar. 2022.

ETXEBERRIA, M; VÁZQUEZ, E; MARÍ, A; BARRA, M. Influence of amount of recycled coarse aggregates and production process on properties of recycled aggregate concrete. Cement and Concrete Research, Barcelona, v. 37, n. 5, p. 735-742, 2007.. Disponivel: https://www.sciencedirect.com/science/article/pii/S0008884607000415. Acesso em: 20 mar. 2022.

GHORBANI, S; SHARIFI, S; GHORBANI, S; TAM, V.WY; BRITO, J; KURDA, R. Effect of crushed concrete waste’s maximum size as partial replacement of natural coarse aggregate on the mechanical and durability properties of concrete. Resources, Conservation and Recycling, v. 149, p. 664-673, 2019. Disponível: https://www.sciencedirect.com/science/article/abs/pii/S0921344919302915. Acesso em: 17 mar. 2022.

HANSEN, T. C. Recycled Aggregates and Recycled aggregate concrete second state-of-the-art-report developments 1945-1985. Rilen Technical Committee - 37 DRC, v. 19, p. 201-246, 1986. Disponivel: https://sci-hub.se/http://dx.doi.org/10.1007/BF02472036. Acesso em: 19 mai. 2022.

JOHN, V. M; ANGULO, S. C; MIRANDA, L; AGOPYAN, V; VASCONCELLOS, F. Strategies for innovation in construction waste management in Brazil. CIB World Building Congress 2004, 2004. Disponível: https://www.researchgate.net/publication/239595433. Acesso em: 05 abr. 2022.

LI, L; WANG, R; LU, Q.Y. Influence of polymer latex on the setting time, mechanical properties and durability of calcium sulfoaluminate cement mortar. Construction and Building Materials, v. 169, p. 911-922, 2018. Disponível: https://www.sciencedirect.com/science/article/abs/pii/S0950061818304847. Acesso em: 17 abr. 2022.

LIMBACHIYA, M; MEDDAH, M. S; OUCHAGOUR, Y. Use of recycled concrete aggregate in fly-ash concrete. Construction and Building Materials, v. 27, p. 439-449, 2012. Disponível: https://www.sciencedirect.com/science/article/pii/S0950061811003771. Acesso em: 06 abr. 2022

MARTÍNEZ, I; ETXEBERRIA, M; PAVÓN, E; DÍAZ, N. Influence of Demolition Waste Fine Particles on the Properties. International Journal of Civil Engineering, 2018. Disponivel: https://sci-hub.se/10.1007/s40999-017-0280-x. Acesso em: 2022 mar. 20.

PEPE,M; KOENDERS, E.A.B; FAELLA, C; MARTINELLI, E. Structural concrete made with recycled aggregates: Hydration process and compressive strength models. Mechanics Research Communications, v. 58, p. 139-145, 2014. Disponivel em: https://www.sciencedirect.com/science/article/pii/S0093641314000111. Acesso em: 27 abr. 2022.

RAMLI, M; TABASSI, A.A; HOE, K.W. Porosity, pore structure and water absorption of polymer-modified mortars: An experimental study under different curing conditions.Composites: Part B, v. 55, p. 221–233, 2013. Disponivel: https://www.sciencedirect.com/science/article/abs/pii/S1359836813003338. Acesso em: 20 abr. 2022.

RAVINDRARAJAH, R.S; TAM, C.T. Recycling concrete as fine aggregate in concrete. International Journal of Cement Composites and Lightweight Concrete, v. 9, p. 235-241, 1987. Disponivel em: https://www.sciencedirect.com/science/article/pii/0262507587900078. Acesso em: 02 maio 2022.

RAY, I; GUPTA, A.P; BISWAS, M. Effect of latex and superplasticiser on portland cement mortar in the fresh state. Cement & Concrete Composites, v. 16, p. 309-316, 1994. Disponivel: https://www.sciencedirect.com/science/article/abs/pii/0958946594900434. Acesso em: 10 abr. 2022.

REVILLA-CUESTA, V; SKAF, M; FALESCHINI, F; MANSO, J.M; ORTEGA-LOPEZ, V. Self-compacting concrete manufacturedwithrecycled concrete aggregate: An overview. Journal of Cleaner Production, v. 262, 2020. Disponível: https://www.sciencedirect.com/science/article/pii/S0959652620314098. Acesso em: 09 abr. 2022.

SALGADO, F; SILVA, F. Propriedades de agregados reciclados de diferentes composições e sua influência na resistência do concreto. Revista IBRACON de Estruturas Materiais, v. 14,2021. Disponível:http://old.scielo.br/scielo.php?script=sci_arttext&pid=S1983-41952021000600207&lng=en&nrm=iso.Acesso em: 18 mar. 2022.

SCHEIFER, D.M; CALLEJAS, I.J.A. Caracterização física e mecânica de blocos de concreto com incorporação de areia de resíduo de construção civil. Revista Matéria, v. 26, 2021. Disponivel: https://www.scielo.br/j/rmat/a/7GSpds4kzSk75tTZZ5KwMpr/?lang=pt. Acesso em: 02 abr. 2022.

SHETE, G.N; UPASE, K.S. Evaluation of Compressive Strength and Water Absorption of Styrene Butadiene Rubber (SBR) Latex Modified Concrete. International Journal of Emerging Trends in Science and Technology, v. 1, p. 1404-1410, 2014. Disponivel: https://journals.indexcopernicus.com/api/file/viewByFileId/150428.pdf. Acesso em: 20 abr. 2022.

SILVA, R. V; BRITO, J; DHIR, R. K. Performance of cementitious renderings and masonry mortars containing recycled aggregates from construction and demolition wastes. Construction and Building Materials, v. 105, p. 400-415, 2016. Disponivel: https://www.sciencedirect.com/science/article/abs/pii/S0950061815308424. Acesso em: 21 mar. 2022.

SONI, E.K; JOSHI, Y.P. Performance Analysis of Styrene Butadiene Rubber-Latex on Cement Concrete Mixes. Journal of Engineering Research and Applications, v. 4, p. 838-844, 2014. Disponivel: https://www.ijera.com/papers/Vol4_issue3/Version%201/EM4301838844.pdf. Acesso em: 18 abr. 2022.

ULSEN, C; KAHN, H; ANGULO, S.C; JOHN, V.M. Composição química de agregados mistos de resíduos de construção e demolição do Estado de São Paulo. Revista Escola de Minas, v. 63, p. 339-346, 2010. Disponivel: https://www.scielo.br/j/rem/a/4WDK9nPXDzVB8GKqjrpcNcM/?lang=pt&format=html#. Acesso em: 25 abr. 2022.

WALTERS, D. G. Latex Hydraulic Cement Additives. Transportation Research Record, v. 1204, p. 71-76, 1988. Disponível: https://onlinepubs.trb.org/Onlinepubs/trr/1988/1204/1204-010.pdf. Acesso em: 15 maio 2022.

WANG, M; WANG, R; YAO, H; FARHAN, S; ZHENG, S; WANG, Z; DU, C; JIANG, H. Research on the mechanism of polymer latex modified cement. Construction and Building Materials, v. 111, p. 710–718, 2016. Disponível: https://www.sciencedirect.com/science/article/abs/pii/S0950061816301763. Acesso em: 20 abr. 2022.

WANG, R; LI, XG; WANG, PM. Influence of polymer on cement hydration in SBR-modified cement pastes. Cement and Concrete Research, v. 36, p. 1744–1751, 2006. Disponível: https://www.sciencedirect.com/science/article/abs/pii/S0008884606001529. Acesso em: 17 abr. 2022.

WANG, R; WANG, PM; LI, XG. Physical and mechanical properties of styrene–butadiene rubber emulsion modified cement mortars. Cement and Concrete Research, v. 35, p. 900 – 906, 2005. Disponível: https://www.sciencedirect.com/science/article/abs/pii/S0008884604003138. Acesso em: 20 mar. 2022.

YAPRAK, H.I; ARUNTAş, H; DEMIR, I; SIMSEK, O.; DURMUş, G. Effects of the fine recycled concrete aggregates on the concrete properties. International Journal of Physical Sciences, v. 6, n. 10, p. 2455-2461, 2011. Disponível: https://www.researchgate.net/publication/285804824_Effects_of_the_fine_recycled_concrete_aggregates_on_the_concrete_properties. Acesso em: 18 abr. 2022.

Published

09/01/2023

How to Cite

Souza Araujo, L., Silva , A. ., Suzart, J. A., Cardozo, M. S., Assunção, P. ., & Moraes Armesto, L. (2023). COMPARATIVE ANALYSIS OF THE BUTADIENE STYRENE LATEX ADDITIVE IN RECYCLED AGGREGATE CONCRETE. RECIMA21 - Revista Científica Multidisciplinar - ISSN 2675-6218, 4(1), e412355. https://doi.org/10.47820/recima21.v4i1.2355