RELACIÓN ENTRE LA PRODUCCIÓN CIENTÍFICA Y LA PRODUCCIÓN TECNOLÓGICA SOBRE INNOVACIONES BASADAS EN EL USO DE BIOPOLÍMEROS EN LA CONSTRUCCIÓN CIVIL
DOI:
https://doi.org/10.47820/recima21.v4i10.4080Palabras clave:
Ingeniería, Medio ambiente, Patente, Propiedad intelectual, Natural resourcesResumen
La demanda por el uso de materiales no convencionales en la construcción civil avanza día a día, con el fin de minimizar el daño ambiental causado por el sector. Entre estos materiales se encuentran los biopolímeros, producidos a partir de fuentes renovables de materia prima. Ya existen varias investigaciones científicas y patentes publicadas relacionadas con esta innovación tecnológica, a menudo desarrolladas en asociación, que favorecen el intercambio de conocimientos y recursos. El objetivo de este estudio fue analizar la relación entre la producción científica y la producción tecnológica sobre innovaciones basadas en el uso de biopolímeros por la construcción civil. Los datos, referidos al periodo de 2010 a 2022, se recogieron en las bases de datos Scopus y Espacenet, y los resultados se analizaron mediante análisis de covarianza (ANCOVA), prueba de Chi-cuadrado de Pearson y correlación de Spearman. Las tasas de crecimiento de las publicaciones científicas y tecnológicas fueron significativas, y tanto la producción científica como la tecnológica crecieron a tasas estadísticamente iguales. El volumen de documentos científicos y de patentes publicados difería si el trabajo se desarrollaba o no en asociación entre países, autores, solicitantes u organizaciones. El volumen de artículos científicos no influyó en el volumen de patentes publicadas, y viceversa. También se demostró estadísticamente que a pesar del número significativo de autores e inventores, solo un pequeño número de ellos fueron responsables de la mayoría de las publicaciones relacionadas con el uso de biopolímeros en la construcción civil.
Descargas
Referencias
ADENIRAN, A. A.; SHAKANTU, W. The health and environmental impact of plastic waste disposal in South African townships: a review. International Journal of Environmental Research and Public Health, v. 19, n. 2, 2022. DOI: https://doi.org/10.3390/ijerph19020779.
AGRESTI, A. An introduction to categorical data analysis. John Wiley & Sons. 2a. ed, Flórida, 2007.
ALQAHTANI, F. K. Development of composite PET plastic-based aggregate and its utilization in green lightweight concrete. Arabian Journal for Science and Engineering, 2022. DOI: https://doi.org/10.1007/s13369-022-06852-z.
BENZERARA, M. et al. Combined and synergic effect of algerian natural fibres and biopolymers on the reinforcement of extruded raw earth. Construction and Building Materials, v. 289, p. 123211, 2021. DOI: https://doi.org/10.1016/j.conbuildmat.2021.123211.
BOZYIGIT, I.; JAVADI, A.; ALTUN, S. Strength properties of xanthan gum and guar gum treated kaolin at different water contents. Journal of Rock Mechanics and Geotechnical Engineering, v. 13, n. 5, p. 1160–1172, 2021. DOI: 10.1016/j.jrmge.2021.06.007.
CAFÉ, L.; BRÄSCHER, M. Organização da informação e bibliometria. Encontros Bibli: revista eletrônica de biblioteconomia e ciência da informação, v. (Esp), p. 54–75, 2008. DOI: https://doi.org/10.5007/1518-2924.2008v13nesp1p54.
CHANG, I. et al. Review on biopolymer-based soil treatment (BPST) technology in geotechnical engineering practices. Transportation Geotechnics, v. 24, n. June, p. 100385, 2020.
DOI:10.1016/j.trgeo.2020.100385.
CHEN, S. H.; LIN, W. T. The dynamic role of universities in developing an emerging sector: a case study of the biotechnology sector. Technological Forecasting and Social Change, v. 123, p. 283–297, 2017. DOI: https://doi.org/10.1016/j.techfore.2016.06.006.
CHOI, S. G. et al. Review on geotechnical engineering properties of sands treated
by microbially induced calcium carbonate precipitation (MICP)
and biopolymers. Construction and Building Materials, v. 246, 2020.
https://doi.org/10.1016/j.conbuildmat.2020.118415.
ESPACENET. 2023. [versão eletrônica]. Disponível em: https://worldwide.espacenet.com/. Acesso em 21 de julho de 2023.
ELSEVIER. Sobre a solução Scopus. Disponível em: https://www.elsevier.com/pt-br/solutions/scopus. Acesso em: 31 janeiro de 2022.
FORTUNA, J. L. Noções básicas de bioestatística e análises. Organizador: Jorge Luiz Fortuna. Apostila (Ciências Biológicas). Texeira de Freitas - BA: Universidade do Estado da Bahia, Departamento de Educação – Campus X, 2021.
GAZZAR, N. T. E.; ESTÉVEZ, A. T.; ABDALLAH, Y. K. Bacterial cellulose as a base material in biodigital architecture (between bio-material development and structural customization). Journal of Green Building, v. 16, n. 2, p. 173–199, 2021. DOI: https://doi.org/10.3992/jgb.16.2.173.
HAIR JR, J. F. et al. Análise multivariada de dados. Tradução Adonai Schlup Sant’Anna. 6. Ed. Porto Alegre: Bookman, 2009.
KASIOUMI, M.; STENGOS, T. A circular model of economic growth and waste recycling. Circular Economy and Sustainability, n. 0123456789, 2022. DOI: https://doi.org/10.1007/s43615-022-00177-7.
LEAR, G. et al. Microbial abilities to degrade global environmental plastic polymer waste are overstated. Environmental Research Letters, v. 17, n. 4, 2022. DOI: https://doi.org/10.1088/1748-9326/ac59a7.
LI, L.; TANG, C. How does inter-organizational cooperation impact organizations’ scientific knowledge generation? Evidence from the biomass energy field. Sustainability (Switzerland), v. 13, n. 1, p. 1–18, 2021. DOI: https://dx.doi.org/10.3390/su13010191.
LIRA, S. A.; NETO, A. C. Coeficientes de correlação para variáveis ordinais e dicotômicas derivados do coeficiente linear de Pearson. Ciencia y Engenharia/ Science and Engineering Journal, v. 15, n. 1/2. p. 45–53, 2006.
LI, Y. et al. Structural characteristics and determinants of an international green technological collaboration network. Journal of Cleaner Production, v. 324, n. October, p. 129258, 2021. DOI: https://doi.org/10.1016/j.jclepro.2021.129258.
LIU, G.; ZHANG, P.; ZHANG, F. University-industry knowledge collaboration in Chinese water pollution abatement technology innovation system. Nature Environment and Pollution Technology, v. 19, n. 3, p. 1179–1185, 2020. DOI: https://doi.org/10.46488/NEPT.2020.v19i03.031.
LOSINI, A. E. et al. Biopolymers impact on hygrothermal properties of rammed earth: from material to building scale. Building and Environment, v. 233, p. 1-14, 2023. DOI: https://doi.org/10.1016/j.buildenv.2023.110087.
LOTKA, A. J. The frequency distribution of scientific productivity. Journal of the Washington academy of sciences, v. 16, n. 12, p. 317-323, 1926.
LUBANGO, L. M. Effects of international co-inventor networks on green inventions in Brazil, India and South Africa. Journal of Cleaner Production, v. 244, p. 118791, 2020. DOI: https://doi.org/10.1016/j.jclepro.2019.118791.
MAO, G. et al. A bibliometric analysis of industrial wastewater treatments from 1998 to 2019. Environmental Pollution, v. 275, p. 115785, 2021. DOI: https://doi.org/10.1016/j.envpol.2020.115785.
MIOT, H. A. Análise de correlação em estudos clínicos e experimentais. Jornal Vascular Brasileiro, v. 17, n. 4, p. 275–279, 2018. DOI: https://doi.org/10.1590/1677-5449.174118.
MISHRA, P. et al. Descriptive statistics and normality tests for statistical data. Annals of Cardiac Anaesthesia, v. 22, n. 1, p. 67–72, 2019. DOI: 10.4103/aca.ACA_157_18.
NI, J. et al. The optimisation analysis of sand-clay mixtures stabilised with xanthan gum polymers. Sustainability. v. 13, 2021. DOI: https://doi.org/10.3390/su13073732.
NWANKWO, C. O. et al. Natural fibres and biopolymers in FRP composites for strengthening concrete structures: A mixed review. Construction and Building Materials, v. 363, p. 1-20, 2023. DOI: https://doi.org/10.1016/j.conbuildmat.2022.129661.
PANAGIOTIDOU, V. et al. 3D extrusion of multi-biomaterial lattices using an environmentally informed workflow. Frontiers of Architectural Research, v. 11, p. 691-708, 2022. DOI: https://doi.org/10.1016/j.foar.2022.06.010.
PEREIRA, C. G. et al. Technological cooperation network in biotechnology: Analysis of patents with Brazil as the priority country. Innovation and Management Review, v. 15, n. 4, p. 416–434, 2018. DOI: 10.1108/INMR-07-2018-0050.
PHIRI, R. et al. Development of sustainable biopolymer-based composites for
lightweight applications from agricultural waste biomass: A review. Advanced Industrial and Engineering Polymer Research, 2023. DOI: https://doi.org/10.1016/j.aiepr.2023.04.004.
RASHID, A. S. A. et al. Sustainable improvement of tropical residual soil using na environmentally friendly additive. Geotechnical and Geological Engineering, v. 35, n. 6, p. 2613–2623, 2017. DOI: https://doi.org/10.1007/s10706-017-0265-1.
RAMACHANDRAN, A. L. et al. Multiscale study of soil stabilization using bacterial biopolymers. Journal of Geotechnical and Geoenvironmental Engineering, v. 147, n. 8, 2021. DOI:10.1061/(ASCE)GT.1943-5606.0002575.
RECH, A. et al. Waste-based biopolymer slurry for 3D printing targeting construction elements. Materials Today Communications, n. 33, p. 1-10, 2022. DOI: https://doi.org/10.1016/j.mtcomm.2022.104963.
RENDÓN-MACÍAS, M. E.; VILLASÍS-KEEVER, M.Á.; MIRANDA-NOVALES, M. G. Estatística descriptiva. Rev Alerg Mex. v. 63, n. 4, p. 397-407, 2016.
SHANMUGAVEL, D. et al. Interaction of a viscous biopolymer from cactus extract with cement paste to produce sustainable concrete. Construction and Building Materials, v. 257, p. 119585, 2020. DOI: https://doi.org/10.1016/j.conbuildmat.2020.119585.
SHI, W.; YANG, W.; DU, D. The scientific cooperation network of chinese scientists and its proximity mechanism. Sustainability (Switzerland), v. 12, n. 2, p. 1–18, 2020. DOI: 10.3390/su12020660.
SU, H. N. Global interdependence of collaborative R&D-typology and association of international co-patenting. Sustainability (Switzerland), v. 9, n. 4, 2017. DOI: 10.3390/su9040541.
TAVAKOLI, A. S. Overview of Analysis of Covariance ( ANCOVA ) Using GLM in SAS ®. Conference Paper. The SouthEast SAS Users Group (SESUG) Conference 2014. October 2015. DOI: 10.13140/RG.2.1.4481.5528.
TURNER, D. P.; HOULE, T. T. Conducting and reporting descriptive statistics. Headache, v. 59, n. 3, p. 300–305, 2019. DOI: https://doi.org/10.1111/head.13489.
WIPO. World Intellectual Property Organization. Patentscope. 2022. [versão eletrônica].. Disponível em: https://www.wipo.int/classifications/ipc/en/. Acesso em 01.sept.2022.
YU, X. et al. The drivers of collaborative innovation of the comprehensive utilization technologies of coal fly ash in China: a network analysis. Environmental Science and Pollution Research, 2022. DOI: https://doi.org/10.1007/s11356-022-19816-5.
ZHANG, M. et al. Examining the antecedents and consequences of green product innovation. Industrial Marketing Management, v. 93, p. 413–427, 1 fev. 2021. DOI: https://doi.org/10.1016/j.indmarman.2020.03.028.
Descargas
Publicado
Número
Sección
Categorías
Licencia
Derechos de autor 2023 RECIMA21 - Revista Científica Multidisciplinar - ISSN 2675-6218
Esta obra está bajo una licencia internacional Creative Commons Atribución 4.0.
Os direitos autorais dos artigos/resenhas/TCCs publicados pertecem à revista RECIMA21, e seguem o padrão Creative Commons (CC BY 4.0), permitindo a cópia ou reprodução, desde que cite a fonte e respeite os direitos dos autores e contenham menção aos mesmos nos créditos. Toda e qualquer obra publicada na revista, seu conteúdo é de responsabilidade dos autores, cabendo a RECIMA21 apenas ser o veículo de divulgação, seguindo os padrões nacionais e internacionais de publicação.
